Biphasic Defibrillator with AED Mode & Built-in Printer
A reliable emergency cardiac-care solution designed for hospitals, clinics, ambulances, and critical-care settings. This biphasic defibrillator combines manual defibrillation, AED guidance, ECG monitoring, and optional vital-sign monitoring in one compact unit.
It features a 7-inch colour TFT display, external paddles with adult and pediatric options, synchronized cardioversion, and energy selection from 2 to 200 J. AED mode automatically analyses the rhythm, identifies shockable conditions, and provides clear visual and audible prompts for guided operation.
Optional capabilities include a thermal printer, SpO₂ and pulse-rate monitoring, non-invasive blood pressure (NIBP), and EtCO₂ monitoring. The rechargeable battery provides portable backup power, making it suitable for rapid-response environments.
Biphasic Defibrillator
- Biphasic truncated-exponential waveform
- Manual defibrillation and AED mode
- 2–200 J external defibrillation energy
- Synchronized cardioversion
- 7-inch colour TFT display
- ECG monitoring with heart-rate alarms
- Adult and pediatric paddle configuration
- Built-in thermal printer option
- Optional SpO₂, pulse rate, NIBP and EtCO₂ monitoring
- Rechargeable battery backup
- CE marked
Specification Details Display 7-inch colour TFT Display Area 150 × 90 mm Dimensions H280 × W330 × D220 mm max. (without paddles) Weight Approx. 6 kg Waveform Biphasic truncated exponential External Defibrillation Energy 2–200 J, 12 selectable steps Internal Defibrillation Energy 2–50 J, 8 selectable steps (optional) Defibrillation Modes Manual, synchronized cardioversion, AED Charging Time Approx. 6 seconds on mains power Patient Impedance Range 35–250 ohms ECG Frequency Response 0.5–35 Hz ECG Leads I, II, III ECG Gain 0.5, 1.0, 2.0 Sweep Speed 12.5, 25, 50 mm/s Heart Rate Range 10–250 BPM Heart Rate Accuracy ±2 BPM Heart Rate Resolution 1 BPM Alarm Limits 10–250 BPM, 1-BPM increments AED Energy 200 J AED Pads Self-adhesive adult pads Optional Monitoring SpO₂, pulse rate, NIBP, EtCO₂ Printer Thermal printer; 50 mm paper width, 20 m roll length AC Input 150–276 VAC, 50 Hz, single phase Battery 12 V, 4.5 Ah rechargeable sealed lead-acid Battery Backup Minimum 3 hours; approx. 70–100 shocks at 150 J Power Consumption 30 W maximum in ECG mode Operating Temperature 5–50 °C Humidity Up to 95% non-condensing Compliance CE marked
